For a limited time only receive a $75 Gift card with a purchase of any Edelbrock E-Force Supercharger System.

Give your stock Mustang a 166 hp boost with the all-new Edelbrock E-Force superchargers. These all-new Edelbrock E-Force Mustang supercharger systems for the 4.6L 3V will allow you to boost your Mustang to a very impressive 466 hp and 439 ft.-lbs. of torque. These systems are exclusively designed by Edelbrock to provide instant, reliable, and safe horsepower for a stock Mustang 4.6L with only 5 psi of boost for minimum stress on your engine. The core of these systems is the all-new Eaton Gen VI 2300 TVS supercharger rotating assembly. Eaton's assembly features a 4-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise, and quiet operation for excellent drivability. These supercharger assemblies have been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. Edelbrock's unique inverted supercharger assembly is placed low in the valley, allowing for an incredible industry-leading 15 in. of intake runner length for maximizing low-end torque. An integrated bypass valve helps to eliminate parasitic loss under light throttle for improved mileage potential. These systems breathe through specially engineered 85mm electronic throttle bodies matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter, less restrictive intake path for improved airflow without the need for a jack-shaft. Keeping the air cool is a 110 sq. in., high-capacity, air-to-water intercooler and a dual core, low-temp heat exchanger. These Edelbrock E-Force Mustang supercharger kits are complete packages which include a supercharger/intake assembly, fuel injectors, spark plugs, a steel belt tensioner brace, and a flash tuner with proper calibration. Key features include: * Complete system that maximizes efficiency and performance by minimizing air restriction in and out of the supercharger * Internal assembly made by Eaton, the same rotors used in the new Corvette ZR-1 * Self-contained oil system with 100,000-mile service interval (no drilling or plumbing required) This part is shipped via truck freight, additional shipping charges will apply. Multiple truck freight parts on an order may increase the shipping amount.

Features and Benefits:
• Installs under the stock hood while maintaining factory accessories
• 2300cc (140 cubic inch) Eaton® TVS® GEN VI rotor assembly
• Unique intake manifold design with 15" long runners (Increased low-end torque)
• 100,000 mile self-contained oiling system
• Optional 3 Year/36,000 mile warranty
• 466 HP and 439 ft./lbs of TQ with low boost!
• Made in USA for absolute quality and performance

E-FORCE EFI SUPERCHARGER KITS
FEATURING EATON® GEN VI TWIN VORTICES SERIES ROTOR GROUP
These Edelbrock E-Force Supercharger Kits provide instant, reliable and safe horsepower with low boost for minimum stress on the engine. The core of each system is the Eaton Gen VI 2300 TV S® Supercharger rotating assembly. Eaton's assembly features a four lobe design with 160° of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. Edelbrock's inverted supercharger assembly is uniquely oriented, allowing for an incredible amount of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential.

Mustang systems breathe through a specially engineered 85mm electronic throttle body and GM systems utilize the factory 90mm throttle body, matched with the most unique and efficient inlet configuration on the market. This combination results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger.

Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and matching aluminum coil covers are black powdered coated for durability with highlighted fins and Edelbrock logo for a unique appearance that will give any engine compartment a custom look. Camaro SS , Corvette , F150 , Mustang