Chet Herbert Cams has been grinding cams since 1949. Performance, high quality and a low price. Everything you want in a performance cam and more. Cams for your tow rig, street performance, street-strip or race. If you need assistance picking out a cam please call our tech line at (704)435-0095.

Strong upper mid-range and top-end. 11.0:1 minimum. High stall required.

RPM Range: 3000-7200Advertised Duration: 300/310Duration @ .050: 245/255Lift: .510/.535Lobe Center: 112c

Tech Tip: When checking for valve spring coil bind, also check for retainer to valve guide clearance. There should be a minimum of .150? clearance between the guide (or valve seal if used) and the retainer.

Tech Tip: Flat tappet cams (hyd. or solid lifter) require to be broken in for the first 30 minutes of operation at 2000 rpm. During this time do not let the engine idle. If adjustments are required during this break-in period, you must shut the engine down completely. If using a spring with over 130 lbs. seat (or over 330 open), you should remove the inner spring during break-in.