|
Lightweight, inexpensive and easy to use, Russell's aluminum fuel line is available in three sizes and three finishes to fit virtually any fuel system. Used where a flexible fuel line is not required, it is easily contoured to route along frame rails and chassis tubes. Connect to fuel line adapters using Russell tube nuts and tube sleeves and a 37° flaring tool or our Hard Tube Adapters. Rated up to 250 psi.
Available in 25 ft. rolls of either 3/8", 1/2" or 5/8" outside diameter
Three finishes available: natural, red or blue anodized finish
For use with 37° flare adapter fittings using the Russell Tube Nut/Tube Sleeve combination or our Hard Tube Adapters
Used for routing the fuel line along frame rails and to Y-Blocks or pump to carburetor
|
